Titanium Gear Backspacer for Demko AD20/S

Titanium Gear Backspacer For Demko AD20/S

Titanium gear backspacer for Demko AD20/S. Weight: .30oz.:

Installation & compatibility note:

- The anodized colors are no longer available.

- Not compatible with Shark Foot Blade. 

- Not compatible with single-piece barrel spacers. Please check whether you have the single or two-piece barrel spacer (spacer pin and ring).

- Some blades may be much longer than normal, potentially causing issues. Before installing the scales, check the blade clearance between the blade and the backspacer in the closed position to ensure they do not contact. 

- The backspacer utilizes the factory barrel spacer pin. First, remove the factory pin from the barrel spacer and insert it into the titanium backspacer. You may find it challenging to push the pin out initially. To help, use a wooden block with a hole so the pin can fall into. Employ a soft metal hammer to lightly tap the pin out. It is best to use two T8 drivers to loosen and tighten the screws by prevent the pin from rotating.