Rockscale Design
Titanium Hexi Scales for Demko AD20/S
Titanium Hexi Scales for Demko AD20/S
Couldn't load pickup availability
Titanium Hexi Scales for Demko AD20/S - Liner Removed
The Demko AD20/S linerless scales feature a fully recessed lock groove, which enhances comfort when deploying or disengaging the shark lock. Thanks to deep milling, the knife weighs about 6.3 oz thin, 7 oz thick, and measures 0.52 inches thick for the thin version, and .59 inches for the thick version.
Note & Installation:
- Thin scales are 0.155 inches thick. Thick scales are 0.195 inches thick.
- AD20S with the thin scale option requires screw set.
- Due to the thinner scales, the pivot pin will be exposed on both sides.
- Longer screws are to be used on the pocket clip side.
- Includes two stainless steel washers that should be placed between each scale and the ball bearing washers, but not between the blade and the ball bearing washers.
- The Pivot Pin should be installed on the show side, which is the left-hand clip mount side, initially.
- The pins have solid and dashed markings on each end. Place the solid ends together on the show side of the scale first.
- Knife and hardware not included.
- All the blasted scales are coated with oil-based PTFE to minimize fingerprints and scratches.
- Made out of grade 5 titanium.
Share
The machining and finish on my scales was top notch. It was probably the easiest scale swap I have ever done.
Everything lined up perfectly and seated with an authoritative snap. I wouldn't hesitate to buy another set or recommend them to others.
They also came in the best packaging I've ever received any scales in.
Initial order was just to replace a couple G10 scales but now that I've tried them I want these on all the knives I can get them on. The ergonomic refinements are spot on and the aggressive stonewash looks great and provides ample grip. Love these scales!
I was very surprised by such great quality the scales have I will purchase more thank you
Really liking these scales so far on my full size AD20. The extra room for the lock makes a huge difference compared to the factory scales. They feel great in hand. I really like these overall thickness of the knife, but I do wish the pivot was flush. Hopefully someone will make an aftermarket pivot that would be flush, I would definitely recommend these scales.
Ever since I slapped these on my ad20 I can't get it outta my pocket. The feel is amazing in hand and the weight is about the same as with the stock scales. I love the extended notch for disengaging the lock. It makes the upward motion of the lockbar a lot easier and natural feeling. The blasting is done well and consistent throughout. Comfort acoustics and looks are all on point. Only nitpick is that the stop pin rattled a bit but a dab of loctite and it's gone, no big deal. This is my second set of scales from rockscale and I think this is going to be my go to company for aftermarket scales from now on.